These cut vinyl decals are a great way to show your Tomorrowland Attractions Cast Pride. These are perfect to put on your hydroflask or car window. The smoother the surface the better and these are not recomended for any rouch textures like outdoor walls, cement or unpaintd wood. All the decals come with a transfer tape for application onto any smooth surface.
HOW TO APPLY CUT VINYL: Vedio coming soon.
INFORMATION
COLORS: Black or White
PRODUCTION TIMING: 1-2 Business Days
SHIPPING: 1-2 Business Days (USPS ONLY)
VINYL: Arlon 500 seres Vinyl Black and White
DURABILITY: 6 Years Outdoors
Scratching, scraping, rubbing or dropping against the surface of the decal will cause it to be removed in sections or pieces. Extreme heat or cold may also effect the adhesive and the decal may move or start to lift up. DO NOT leave in a hot car or put in the freezer. Water Proof.
CARE: These Dacals will last years if you avoid crattching, dropping, scraping or extream heat. You will loose sharp cornerss and smaller pieces with less adhesive on them Normal use like on a hydroflask should at least last a rear with normal use. NO NOT LEAVE VINYL DECALS IN THE CAR. The adheasive will be effected and may start to run or release. Any vinyl adhesive can be cleaned and removed with rubbing alcohol. 70% or 90%.
NO REFUNDS OR REPLACEMENTS if not installed correctly or on the wrong surface. If the decals is received damaged we will need a photo of the damaged decal with the packaging or envelope it came in. Claims will be subbmitted to the USPS for any decals damaged in transit. Theft or vadelism will not be covered for returns or replacements.
Monorail Pilots Cut Vinyl Decal
APPLICATION INSTRUCTIONS: Clean the application surface well before applying to prevent peeling. Cut a piece of masking tape the same with of the decal . Apply the masking tape to the top edge of the transfer tape side of the decal so there is at least half the masking tape over the decal edge. Apply the masking tape and decal paper backing face down to your cleaned application surface. The masking tape will act like a hinge for application. Once you have the decal placed, flip the decal over using the maksing tape hinge. Carefully remove the paper backing from the transfertape face making sure all the vinyl elements stay on the transfertape. If the vinyl stays on the paper put the paper completly back on and rub the top of the paper with a credit card to force the vinyl onto the transfer tape. Once the paper backing is removed, slowly flip the transfer over using the hinge. Start to apply the decal at the masking tape edge and use a credit card to smooth the decal onto the surface pushing air from under the deal at the same time. Keep the card at an angle and pushing the air out from under the vinyl at the same time pushing onto the application surface. Once the vinyl and transfertape are applied together take the credit card and push the decal onto the application surface to make sure all the vinyl adhesive touches the surface surface. This also pushes any air out from under the vinyl decal. Carefully remove the transfer tape making sure the vinyl stays onto the application surface. If the vinyl lifts up withth e transfer tape, push and smooth the transfer tape and vinyl back onto the application surafce making sure the adhesive sticks to the application surface better. Remove the transfer tape slowly and carefully all the vinyl is applied to the application surface. If you get any bubbles, simply use a pin or exacto knife to poke a very small hole and push the air out with your finger. Be care not to rip the vinyl or crate visible holes in the vinyl.